Very tight clearance
Hinowa / Spider Lift
1570 Lightlift
- Fits with +0 mm width clearance
- Fits with +0 mm height clearance
15 mWorking height
230 kgCapacity
1,950 kgWeight
Bi-energyPower
748 mm wide1990 mm stowed height
Manufacturer source
Free tool
Will It Fit?
Enter the width and height of your access point to find MEWPs that can fit through it.
Common openings:
More filters
Very tight clearance
Genie / Vertical Mast
AWP-20S
- Fits with +8 mm width clearance
- Fits with +10 mm height clearance
8.12 mWorking height
159 kgCapacity
307 kgWeight
ElectricPower
740 mm wide1980 mm stowed height
Manufacturer source
Very tight clearance
JLG / Push Around
EcoLift 70
- Fits with +11 mm width clearance
- Fits with +60 mm height clearance
3.9624 mWorking height
149.685 kgCapacity
318.875 kgWeight
737 mm wide1930 mm stowed height
Manufacturer source
Very tight clearance
JLG / Push Around
EcoLift 50
- Fits with +50 mm width clearance
- Fits with +441 mm height clearance
3.3528 mWorking height
149.685 kgCapacity
195.952 kgWeight
699 mm wide1549 mm stowed height
Manufacturer source
Published dimensions are a reference — allow suitable clearance and verify against the manufacturer documentation before planning access.
Checking site access? You may also need the Slope & Gradient Converter.
What width MEWP will fit through a doorway?
Machine widths vary enormously across the catalogue -- from compact vertical mast and push-around lifts designed specifically for restricted access, at well under a metre wide, up to wide scissor lifts and boom lifts over 1.8 m. There's no single "doorway width" answer: it depends entirely on the machine type and model, which is exactly what this tool checks for you against real published dimensions rather than a rule of thumb.
How to measure an opening for a MEWP
Measure the narrowest point of the route, not just the doorway itself: the lowest overhead height, any door furniture (closers, handles, frames) that intrudes into the opening, thresholds and steps, and any corners or turns immediately before or after the opening that the machine also has to clear. Check the manufacturer's transport or stowed configuration too -- some machines are wider or taller in their working configuration than when stowed for movement.
MEWP access isn't just about width
A machine that fits through the opening still needs turning space on the other side, adequate floor loading for its weight, a safe gradient and ground condition to travel on, and clearance from overhead obstructions. Check the Slope & Gradient Converter for site gradients, and browse the full MEWP database for complete specifications before booking.