Genie AWP-20S from the supplied specification document

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification · page 1

Vertical MastManufacturer country: United States

AWP-20S

8.12 m working height, 159 kg platform capacity.

Working height
8.12 m
Basket capacity
159 kg
Vehicle weight
307 kg
Stowed height
1.98 m
Transport width
0.74 m
Power
Electric
Configuration-dependent valuesRead the capacity and reach note ↓
SlabMastElectricVertical Mast

Primary manufacturer source

Specification PDF

Open full screen
Official specificationPrimary sourceFull screen

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification - page 1

Normalized data

Specifications

Empty fields are omitted

Working envelope

Working height
8.12 m

Capacity

Safe working load
159 kg

Dimensions

Machine width
0.74 m
Stowed height
1.98 m

Weight

Machine weight
307 kg

Mobility

Drive
Slab

Power

Power source
Electric

Before use

Safety & operating limits

Risk assessment

Complete a site-specific risk assessment and rescue plan before work starts.

Working envelope

Confirm outreach at the intended basket load, slew angle, stabilizer position and chassis configuration.

Wind conditions

Check the applicable wind rating in the current manufacturer manual and stop work when limits are exceeded.

Competent selection

Verify ground conditions, outrigger loads, access, exclusion zones and operator requirements with a competent supplier.

Model questions

Genie AWP-20S FAQ

What is the maximum working height of the Genie AWP-20S?

The recorded maximum working height for the Genie AWP-20S is 8.12 m.

Source: manufacturer specification document
What is the platform capacity of the Genie AWP-20S?

The recorded maximum platform capacity for the Genie AWP-20S is 159 kg.

Source: manufacturer specification document
How much does the Genie AWP-20S weigh?

The recorded machine weight for the Genie AWP-20S is 307 kg.

Source: manufacturer specification document
What type of machine is the Genie AWP-20S?

The recorded machine type for the Genie AWP-20S is Vertical Mast.

Source: manufacturer specification document