Very tight clearance
JLG / Scissor Lift
ES2632
- Fits with +0 mm width clearance
- Fits with +0 mm height clearance
9.75 mWorking height
1,996 kgWeight
ElectricPower
810 mm wide1100 mm stowed height
Manufacturer source
Free tool
Will It Fit?
Enter the width and height of your access point to find MEWPs that can fit through it.
Common openings:
More filters
Very tight clearance
JLG / Vertical Mast
ES2632M
- Fits with +0 mm width clearance
- Fits with +0 mm height clearance
9.75 mWorking height
272 kgCapacity
2,091 kgWeight
ElectricPower
810 mm wide1100 mm stowed height
Manufacturer source
Very tight clearance
JLG / Scissor Lift
ES1932
- Fits with +0 mm width clearance
- Fits with +120 mm height clearance
7.8 mWorking height
230 kgCapacity
1,565 kgWeight
ElectricPower
810 mm wide980 mm stowed height
Manufacturer source
Tight clearance
JLG / Vertical Mast
ES1530M
- Fits with +50 mm width clearance
- Fits with +310 mm height clearance
6.5 mWorking height
227 kgCapacity
880 kgWeight
ElectricPower
760 mm wide790 mm stowed height
Manufacturer source
Tight clearance
JLG / Vertical Mast
ES1330M
- Fits with +50 mm width clearance
- Fits with +400 mm height clearance
5.8 mWorking height
227 kgCapacity
900 kgWeight
ElectricPower
760 mm wide700 mm stowed height
Manufacturer source
Published dimensions are a reference — allow suitable clearance and verify against the manufacturer documentation before planning access.
Checking site access? You may also need the Slope & Gradient Converter.
What width MEWP will fit through a doorway?
Machine widths vary enormously across the catalogue -- from compact vertical mast and push-around lifts designed specifically for restricted access, at well under a metre wide, up to wide scissor lifts and boom lifts over 1.8 m. There's no single "doorway width" answer: it depends entirely on the machine type and model, which is exactly what this tool checks for you against real published dimensions rather than a rule of thumb.
How to measure an opening for a MEWP
Measure the narrowest point of the route, not just the doorway itself: the lowest overhead height, any door furniture (closers, handles, frames) that intrudes into the opening, thresholds and steps, and any corners or turns immediately before or after the opening that the machine also has to clear. Check the manufacturer's transport or stowed configuration too -- some machines are wider or taller in their working configuration than when stowed for movement.
MEWP access isn't just about width
A machine that fits through the opening still needs turning space on the other side, adequate floor loading for its weight, a safe gradient and ground condition to travel on, and clearance from overhead obstructions. Check the Slope & Gradient Converter for site gradients, and browse the full MEWP database for complete specifications before booking.