MEWP.guide
Snorkel S2755RTE official specification view

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification · page 1

Scissor LiftManufacturer country: United States

S2755RTE

Electric narrow rough-terrain scissor lift with 10.1 m working height and 300 kg platform capacity.

Working height
10.1 m
Basket capacity
300 kg
Vehicle weight
2,750 kg
Platform height
8.1 m
Stowed height
2.5 m
Transport width
1.45 m
Transport length
3.3 m
Power
Electric
Configuration-dependent valuesRead the capacity and reach note ↓
ElectricScissor liftRough terrainNarrow
Open PDFSource

Primary manufacturer source

Specification PDF

Open full screen
Official specificationPrimary sourceFull screen

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification - page 1

Normalized data

Specifications

Empty fields are omitted

Working envelope

Working height
10.1 m
Platform height
8.1 m

Capacity

Safe working load
300 kg

Dimensions

Machine width
1.45 m
Machine length
3.3 m
Stowed height
2.5 m

Weight

Machine weight
2,750 kg

Mobility

Drive
Wheeled
Drive speed
5.2 km/h
Gradeability
35%
Turning radius
2.5 m

Power

Power source
Electric

Before use

Safety & operating limits

Risk assessment

Complete a site-specific risk assessment and rescue plan before work starts.

Working envelope

Confirm outreach at the intended basket load, slew angle, stabilizer position and chassis configuration.

Wind conditions

Check the applicable wind rating in the current manufacturer manual and stop work when limits are exceeded.

Competent selection

Verify ground conditions, outrigger loads, access, exclusion zones and operator requirements with a competent supplier.

Model questions

Snorkel S2755RTE FAQ

What is the working height of the Snorkel S2755RTE?

The published working height is 10.1 m. Working-height conventions can vary by market and configuration, so confirm the applicable manufacturer document before use.

What is the platform height of the Snorkel S2755RTE?

The platform height is listed as 8.1 m. Platform height is different from working height because it does not include the operator's reach above the platform.

What is the platform capacity of the S2755RTE?

The listed safe working load is 300 kg. Confirm whether that capacity applies throughout the required working envelope and configuration.

How wide is the S2755RTE?

The listed transport width is 1.45 m. Check the complete stowed envelope, mirrors, stabilisers, tyres or tracks and the route clearance before transport or setup.

How much does the S2755RTE weigh?

The listed machine weight is 2,750 kg. Actual transport weight may vary with chassis, fuel, batteries, basket and optional equipment.

What powers the S2755RTE?

This machine is listed as electric powered. Confirm the exact power configuration and charging or refuelling requirements in the source document.

What transport dimensions should be checked for the S2755RTE?

The published transport dimensions include a length of 3.3 m and a stowed height of 2.5 m. Confirm the complete configured envelope before loading, towing or entering a site.

Where can the S2755RTE be used?

The catalogue flags this scissor lift for outdoor use. Site conditions, wind limits, ground bearing capacity and the manufacturer's operating instructions still determine suitability.