MEWP.guide
Niftylift HR12 4x4 shown in its official manufacturer specification

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification · page 1

Articulating BoomManufacturer country: United Kingdom

HR12 4x4

12.1 m working height, 6.4 m outreach, 227 kg platform capacity.

Working height
12.1 m
Max outreach
6.4 m
Basket capacity
227 kg
Vehicle weight
3,480 kg
Stowed height
1.99 m
Transport width
1.6 m
Transport length
4.05 m
Power
Diesel
Configuration-dependent valuesRead the capacity and reach note ↓
DieselWheeledSelf Propelled
Open PDFSource

Primary manufacturer source

Specification PDF

Open full screen
Official specificationPrimary sourceFull screen

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification - page 1

Normalized data

Specifications

Empty fields are omitted

Working envelope

Working height
12.1 m
Horizontal outreach
6.4 m

Capacity

Safe working load
227 kg

Dimensions

Machine width
1.6 m
Machine length
4.05 m
Stowed height
1.99 m

Weight

Machine weight
3,480 kg

Mobility

Drive
Wheeled

Power

Power source
Diesel

Before use

Safety & operating limits

Risk assessment

Complete a site-specific risk assessment and rescue plan before work starts.

Working envelope

Confirm outreach at the intended basket load, slew angle, stabilizer position and chassis configuration.

Wind conditions

Check the applicable wind rating in the current manufacturer manual and stop work when limits are exceeded.

Competent selection

Verify ground conditions, outrigger loads, access, exclusion zones and operator requirements with a competent supplier.

Model questions

Niftylift HR12 4x4 FAQ

What is the working height of the Niftylift HR12 4x4?

The published working height is 12.1 m. Working-height conventions can vary by market and configuration, so confirm the applicable manufacturer document before use.

How much horizontal outreach does the HR12 4x4 have?

The published maximum horizontal outreach is 6.4 m. Outreach can reduce with basket load, slew angle, stabiliser position and optional equipment.

What is the platform capacity of the HR12 4x4?

The listed safe working load is 227 kg. Confirm whether that capacity applies throughout the required working envelope and configuration.

How wide is the HR12 4x4?

The listed transport width is 1.6 m. Check the complete stowed envelope, mirrors, stabilisers, tyres or tracks and the route clearance before transport or setup.

How much does the HR12 4x4 weigh?

The listed machine weight is 3,480 kg. Actual transport weight may vary with chassis, fuel, batteries, basket and optional equipment.

What powers the HR12 4x4?

This machine is listed as diesel powered. Confirm the exact power configuration and charging or refuelling requirements in the source document.

What transport dimensions should be checked for the HR12 4x4?

The published transport dimensions include a length of 4.05 m and a stowed height of 1.99 m. Confirm the complete configured envelope before loading, towing or entering a site.

Where can the HR12 4x4 be used?

The catalogue flags this articulating boom for outdoor use. Site conditions, wind limits, ground bearing capacity and the manufacturer's operating instructions still determine suitability.