MEWP.guide
JLG AE1932 shown in its official manufacturer specification

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification · page 1

Scissor LiftManufacturer country: United States

AE1932

7.62 m working height, 275 kg platform capacity.

Working height
7.62 m
Basket capacity
275 kg
Vehicle weight
1,565 kg
Platform height
5.8 m
Stowed height
0.98 m
Transport width
0.81 m
Transport length
1.74 m
Power
Electric
Configuration-dependent valuesRead the capacity and reach note ↓
ElectricWheeledAE DaVinci Series
Open PDFSource

Primary manufacturer source

Specification PDF

Open full screen
Official specificationPrimary sourceFull screen

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification - page 1

Normalized data

Specifications

Empty fields are omitted

Working envelope

Working height
7.62 m
Platform height
5.8 m

Capacity

Safe working load
275 kg

Dimensions

Machine width
0.81 m
Machine length
1.74 m
Stowed height
0.98 m

Weight

Machine weight
1,565 kg

Mobility

Drive
Wheeled
Drive speed
6.4 km/h
Gradeability
25%

Power

Power source
Electric

Before use

Safety & operating limits

Risk assessment

Complete a site-specific risk assessment and rescue plan before work starts.

Working envelope

Confirm outreach at the intended basket load, slew angle, stabilizer position and chassis configuration.

Wind conditions

Check the applicable wind rating in the current manufacturer manual and stop work when limits are exceeded.

Competent selection

Verify ground conditions, outrigger loads, access, exclusion zones and operator requirements with a competent supplier.

Model questions

JLG AE1932 FAQ

What is the working height of the JLG AE1932?

The published working height is 7.62 m. Working-height conventions can vary by market and configuration, so confirm the applicable manufacturer document before use.

What is the platform height of the JLG AE1932?

The platform height is listed as 5.8 m. Platform height is different from working height because it does not include the operator's reach above the platform.

What is the platform capacity of the AE1932?

The listed safe working load is 275 kg. Confirm whether that capacity applies throughout the required working envelope and configuration.

How wide is the AE1932?

The listed transport width is 0.81 m. Check the complete stowed envelope, mirrors, stabilisers, tyres or tracks and the route clearance before transport or setup.

How much does the AE1932 weigh?

The listed machine weight is 1,565 kg. Actual transport weight may vary with chassis, fuel, batteries, basket and optional equipment.

What powers the AE1932?

This machine is listed as electric powered. Confirm the exact power configuration and charging or refuelling requirements in the source document.

What transport dimensions should be checked for the AE1932?

The published transport dimensions include a length of 1.74 m and a stowed height of 0.98 m. Confirm the complete configured envelope before loading, towing or entering a site.

Where can the AE1932 be used?

The catalogue flags this scissor lift for indoor use. Site conditions, wind limits, ground bearing capacity and the manufacturer's operating instructions still determine suitability.