MEWP.guide
JLG 830p shown in its official manufacturer specification

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification · page 1

Push AroundManufacturer country: United States

830p

4.50 m working height, 200 kg platform capacity.

Working height
4.5 m
Basket capacity
200 kg
Vehicle weight
285 kg
Platform height
2.5 m
Stowed height
1.56 m
Transport width
0.75 m
Transport length
1.19 m
Configuration-dependent valuesRead the capacity and reach note ↓
WheeledPush Around Lifts
Open PDFSource

Primary manufacturer source

Specification PDF

Open full screen
Official specificationPrimary sourceFull screen

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification - page 1

Normalized data

Specifications

Empty fields are omitted

Working envelope

Working height
4.5 m
Platform height
2.5 m

Capacity

Safe working load
200 kg
Indoor occupants
1
Outdoor occupants
0

Dimensions

Machine width
0.75 m
Machine length
1.19 m
Stowed height
1.56 m
Platform
0.75 × 0.1 m

Weight

Machine weight
285 kg

Mobility

Drive
Push around

Before use

Safety & operating limits

Risk assessment

Complete a site-specific risk assessment and rescue plan before work starts.

Working envelope

Confirm outreach at the intended basket load, slew angle, stabilizer position and chassis configuration.

Wind conditions

Check the applicable wind rating in the current manufacturer manual and stop work when limits are exceeded.

Competent selection

Verify ground conditions, outrigger loads, access, exclusion zones and operator requirements with a competent supplier.

Model questions

JLG 830p FAQ

What is the working height of the JLG 830p?

The published working height is 4.5 m. Working-height conventions can vary by market and configuration, so confirm the applicable manufacturer document before use.

What is the platform height of the JLG 830p?

The platform height is listed as 2.5 m. Platform height is different from working height because it does not include the operator's reach above the platform.

What is the platform capacity of the 830p?

The listed safe working load is 200 kg. Confirm whether that capacity applies throughout the required working envelope and configuration.

How wide is the 830p?

The listed transport width is 0.75 m. Check the complete stowed envelope, mirrors, stabilisers, tyres or tracks and the route clearance before transport or setup.

How much does the 830p weigh?

The listed machine weight is 285 kg. Actual transport weight may vary with chassis, fuel, batteries, basket and optional equipment.

What transport dimensions should be checked for the 830p?

The published transport dimensions include a length of 1.19 m and a stowed height of 1.56 m. Confirm the complete configured envelope before loading, towing or entering a site.

Where can the 830p be used?

The catalogue flags this push around for indoor use. Site conditions, wind limits, ground bearing capacity and the manufacturer's operating instructions still determine suitability.