MEWP.guide
JLG 600S HC3 shown in its official manufacturer specification

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification · page 1

Telescopic BoomManufacturer country: United States

600S HC3

15.29 m outreach, 454 kg platform capacity.

Max outreach
15.29 m
Basket capacity
454 kg
Vehicle weight
10,387 kg
Platform height
18.18 m
Stowed height
2.5 m
Transport width
2.49 m
Transport length
8.71 m
Power
Diesel
Configuration-dependent valuesRead the capacity and reach note ↓
DieselWheeledTelescopic Boom Lift
Open PDFSource

Primary manufacturer source

Specification PDF

Open full screen
Official specificationPrimary sourceFull screen

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification - page 1

Normalized data

Specifications

Empty fields are omitted

Working envelope

Platform height
18.18 m
Horizontal outreach
15.29 m

Capacity

Safe working load
454 kg

Dimensions

Machine width
2.49 m
Machine length
8.71 m
Stowed height
2.5 m
Platform
0.91 × 2.44 m

Weight

Machine weight
10,387 kg

Mobility

Drive
Wheeled
Gradeability
45%

Power

Power source
Diesel

Before use

Safety & operating limits

Risk assessment

Complete a site-specific risk assessment and rescue plan before work starts.

Working envelope

Confirm outreach at the intended basket load, slew angle, stabilizer position and chassis configuration.

Wind conditions

Check the applicable wind rating in the current manufacturer manual and stop work when limits are exceeded.

Competent selection

Verify ground conditions, outrigger loads, access, exclusion zones and operator requirements with a competent supplier.

Model questions

JLG 600S HC3 FAQ

What is the platform height of the JLG 600S HC3?

The platform height is listed as 18.18 m. Platform height is different from working height because it does not include the operator's reach above the platform.

How much horizontal outreach does the 600S HC3 have?

The published maximum horizontal outreach is 15.29 m. Outreach can reduce with basket load, slew angle, stabiliser position and optional equipment.

What is the platform capacity of the 600S HC3?

The listed safe working load is 454 kg. Confirm whether that capacity applies throughout the required working envelope and configuration.

How wide is the 600S HC3?

The listed transport width is 2.49 m. Check the complete stowed envelope, mirrors, stabilisers, tyres or tracks and the route clearance before transport or setup.

How much does the 600S HC3 weigh?

The listed machine weight is 10,387 kg. Actual transport weight may vary with chassis, fuel, batteries, basket and optional equipment.

What powers the 600S HC3?

This machine is listed as diesel powered. Confirm the exact power configuration and charging or refuelling requirements in the source document.

What transport dimensions should be checked for the 600S HC3?

The published transport dimensions include a length of 8.71 m and a stowed height of 2.5 m. Confirm the complete configured envelope before loading, towing or entering a site.

Where can the 600S HC3 be used?

The catalogue flags this telescopic boom for outdoor use. Site conditions, wind limits, ground bearing capacity and the manufacturer's operating instructions still determine suitability.