MEWP.guide
Genie GS-3246 E-Drive shown in its official manufacturer specification

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification · page 1

Scissor LiftManufacturer country: United States

GS-3246 E-Drive

11.78 m working height, 318 kg platform capacity.

Working height
11.78 m
Basket capacity
318 kg
Vehicle weight
2,367 kg
Transport width
1.16 m
Transport length
2.44 m
Power
Electric
Configuration-dependent valuesRead the capacity and reach note ↓
ElectricWheeledSlab Scissor Lifts
Open PDFSource

Primary manufacturer source

Specification PDF

Open full screen
Official specificationPrimary sourceFull screen

Your browser cannot display the PDF inline.

Open the specification PDF
Original specification - page 1

Normalized data

Specifications

Empty fields are omitted

Working envelope

Working height
11.78 m

Capacity

Safe working load
318 kg

Dimensions

Machine width
1.16 m
Machine length
2.44 m

Weight

Machine weight
2,367 kg

Mobility

Drive
Wheeled

Power

Power source
Electric

Before use

Safety & operating limits

Risk assessment

Complete a site-specific risk assessment and rescue plan before work starts.

Working envelope

Confirm outreach at the intended basket load, slew angle, stabilizer position and chassis configuration.

Wind conditions

Check the applicable wind rating in the current manufacturer manual and stop work when limits are exceeded.

Competent selection

Verify ground conditions, outrigger loads, access, exclusion zones and operator requirements with a competent supplier.

Model questions

Genie GS-3246 E-Drive FAQ

What is the working height of the Genie GS-3246 E-Drive?

The published working height is 11.78 m. Working-height conventions can vary by market and configuration, so confirm the applicable manufacturer document before use.

What is the platform capacity of the GS-3246 E-Drive?

The listed safe working load is 318 kg. Confirm whether that capacity applies throughout the required working envelope and configuration.

How wide is the GS-3246 E-Drive?

The listed transport width is 1.16 m. Check the complete stowed envelope, mirrors, stabilisers, tyres or tracks and the route clearance before transport or setup.

How much does the GS-3246 E-Drive weigh?

The listed machine weight is 2,367 kg. Actual transport weight may vary with chassis, fuel, batteries, basket and optional equipment.

What powers the GS-3246 E-Drive?

This machine is listed as electric powered. Confirm the exact power configuration and charging or refuelling requirements in the source document.

What transport dimensions should be checked for the GS-3246 E-Drive?

The published transport dimensions include a length of 2.44 m. Confirm the complete configured envelope before loading, towing or entering a site.

Where can the GS-3246 E-Drive be used?

The catalogue flags this scissor lift for indoor and outdoor use. Site conditions, wind limits, ground bearing capacity and the manufacturer's operating instructions still determine suitability.