B-LIFT 18 HD

18 m working height, 12 m outreach, 300 kg platform capacity.

Working height: 18 m
Max outreach: 12 m
Basket capacity: 300 kg

Configuration-dependent valuesRead the capacity and reach note ↓

WheeledTruck-mounted platform

Open PDF Source

Primary manufacturer source

Specification PDF

Open full screen

Official specificationPrimary sourceFull screen

Original specification - page 1

Normalized data

Specifications

Empty fields are omitted

Working envelope

Working height: 18 m
Horizontal outreach: 12 m

Capacity

Safe working load: 300 kg

Mobility

Drive: Wheeled

Before use

Safety & operating limits

Risk assessment

Complete a site-specific risk assessment and rescue plan before work starts.

Working envelope

Confirm outreach at the intended basket load, slew angle, stabilizer position and chassis configuration.

Wind conditions

Check the applicable wind rating in the current manufacturer manual and stop work when limits are exceeded.

Competent selection

Verify ground conditions, outrigger loads, access, exclusion zones and operator requirements with a competent supplier.

Model questions

CTE B-LIFT 18 HD FAQ

What is the working height of the CTE B-LIFT 18 HD?

The published working height is 18 m. Working-height conventions can vary by market and configuration, so confirm the applicable manufacturer document before use.

How much horizontal outreach does the B-LIFT 18 HD have?

The published maximum horizontal outreach is 12 m. Outreach can reduce with basket load, slew angle, stabiliser position and optional equipment.

What is the platform capacity of the B-LIFT 18 HD?

The listed safe working load is 300 kg. Confirm whether that capacity applies throughout the required working envelope and configuration.

Where can the B-LIFT 18 HD be used?

The catalogue flags this truck mounted for outdoor use. Site conditions, wind limits, ground bearing capacity and the manufacturer's operating instructions still determine suitability.